Product Description:
The ZMCT103C AC current transformer module can be used to monitor current in various applications. This module is based on the ZMCT103C IC. The mechanism of this IC is that the wire whose current is to be measured, passes through the hole of the IC. Then, according to AC current, voltage is induced on both sides of the IC.
In this module, the output voltage of ZMCT103C IC is amplified by a series of amplifiers and can be used as the module output. The module outputs an analog AC voltage corresponding to AC current of the wire passing through the module hole.
Specifications:
Rated input current: 0-10A(50Ω)
Rated output current: 5mA at input 5A
phase angle error: ≤15'(input 5A,sampling resistor 50Ω)
Isolation withstand voltage: 4500V
Turns Ratio: 1000:1
Measurement accuracy Class: 0.2
Linearity: ≤0.2%(5%dot~120%dot)
Installation: PCB mounting(Pin Length>3mm)
Operating Frequency: 45-55Hz
operating temperature: -40C ~+85C
Applications:
-Metering (electrical energy metres)
-AC Voltage measurements
-Sensing Overload Current
-Ground fault detection
-Household electrical equipment
-Industrial apparatuses
-Electrical testing equipment and relay protection
-Analog to digital circuits